Phase 3 — Structures & Materials
Timing
March–mid-April 2027
Goal
Understand how a hull resists bending, twisting and the sea.
Topics
- Hull girder, hogging, sagging and longitudinal strength
- Wood, iron/steel transverse framing and longitudinal (Isherwood) framing
- Riveting versus welding; Liberty-ship brittle fracture; subdivision
- Shell plating and development of flat plates over a curved hull
- Masts and rigging as structures; load paths into the hull
Maths & workshop
- Load, shear and bending-moment curves; section modulus; stress = M/Z
- Compare card-model flat parts with double-curved hull surfaces; revisit Tjiwangi lifeboat strips
- Compare welded Tjiwangi with riveted Lysistrata (1900) and Vernyy (1896)
- Trace shroud and chain-plate load paths; compare hemp/deadeyes (Steel) with wire/rigging screws (Underhill)
Reading
- Main: Eyres & Bruce, Ship Construction
- Also: Longridge, Anatomy of Nelson’s Ships; Classic Ship Building; Steel’s masting and rigging volumes; Titanic titles; Davis, Ship Models: How to Build Them; Stölting, Schiffe aus Papier
Case studies
Nelson-era wooden construction; Titanic.
Write-up
“From oak to steel: the hull girder 1800–1950.”