TURTLE POND

]

Turtle Pond Project

Ownership: 100%

Commodities: Nickel, Copper, Cobalt

Location: NW Ontario

Status: Early stage nickel-copper-cobalt exploration

Next Steps: Surface exploration of nickel-copper prospects, geophysical surveys.

The Company holds a 100% interest in the Glatz, Night Danger Nickel-Copper Claims located approximately 70 km from the Company’s flagship Kenbridge Nickel Deposit. The property is situated in an area of excellent infrastructure and consists of 16 claim units totalling 400ha. The 16 claim unit property hosts the historical Glatz and Night Danger nickel-copper showings. The Turtle Pond project area of nickel-copper mineralization lies on the eastern flanks of the Atikwa Batholith in a similar geological setting to the company’s Kenbridge deposit and provides Tartisan with an additional target to develop resources in this region.

Previous exploration efforts identified nickel-copper sulphide mineralization in twelve trenches along a 700 metre trend at the Glatz nickel copper showing. The zone, discovered in 1965 by local prospector A. Glatz, is up to 40 metres wide and is open along strike and at depth. Historical grab samples were reported to contain up to 1.95% Ni. In 2007, Canadian Arrow Mines Limited. conducted a surface grab sampling program that produced the following results: 1.28% Ni, 0.26% Cu re Glatz Trench 3; 0.99% Ni, 0.18% Cu re Glatz Trench 3; 0.39% Ni, 4.06% Cu re Trench 4. The mineralization varies from disseminated sulphides to narrow semi-massive sulphide bands. Six short drill holes were completed at that time with hole GZ-09- 02 encountering 0.34% Ni, 0.16% Cu and 0.02% Co over 5.9 m from 45.0-50.9 m.

Exploration diamond drilling work completed in 2009 and 2010 on the Night Danger nickel- copper showing reported a nine metre wide section of stringers and blebs of sulphide that assayed 0.57% Ni and 0.45% Cu at a drill depth of 79m in hole ND-09-1. Two sections within this interval assayed greater than 1% nickel. Drill hole ND-10-1 intersected 4.53% Ni over 0.7m at a drill depth of 57.5m (Source; MNDM assessment files and Canadian Arrow Mines Limited news release dated June 1, 2010).